Is this machine suitable for PE-coated food-grade paper cup stock?

Yes. Paper cup stock is PE-coated food-grade board, stiffer and heavier than plain paper, so it needs firm handling and clean cutting that does not crack the coating. Our paper cup slitting rewinding machine uses strong steady tension and sharp shear knives to slit the coated board squarely, keeping the PE layer intact so the finished rolls feed reliably into cup-forming machines without edge defects.

What width accuracy does cup stock need for the cup-forming machine?

Cup forming machines need precise, repeatable roll widths or blanks misregister, so accurate knife positioning is essential. Our machine sets shear knives to tight tolerance and holds tension steady so each slit width stays consistent down the reel. This gives cup makers machine-ready rolls in the exact widths their formers require, cutting waste and stoppages on the cup line that runs the finished stock.

How does it keep the PE coating and board edge clean during slitting?

Coated cup board can chip or whisker at the edge if knives are dull or clearance is wrong. We run sharp shear knives at correct overlap and side pressure so the cut passes cleanly through board and PE film together, leaving a smooth square edge. Controlled tension stops the stiff board from cracking, so finished rolls hold their food-grade edge quality through to cup forming.

What reel weight and speed does the paper cup slitter handle?

The machine takes jumbo cup stock reels up to about 1000 kg across working widths of 500 to 2500 mm, with standard speed of 150 MPM and a high speed option to 300 MPM where the coated board runs stable. Firm braking and taper tension keep the heavy stiff reels flat and tight, so paper cup plants get consistent, well-wound rolls ready for their forming machines.

What is the indicative price of a paper cup slitting rewinding machine?

Cost depends on width, speed, reel weight and number of knives, since stiff PE-coated board needs firm tension and durable cutting. A compact unit is far cheaper than a wide 300 MPM line, so we quote against your stock and roll sizes rather than a fixed figure. Tell us your cup board GSM, coating and required widths and we provide an indicative written quotation.

Do you customise and how fast is delivery for cup makers in India?

Yes. We build each paper cup slitter rewinder to your board grade, width and cup-former roll widths from our Ahmedabad works, which suits paper cup makers across India. Delivery is usually around 4 to 6 weeks after order confirmation depending on the configuration. We include installation, operator training and spares, advise on knife upkeep for coated board, and offer export packing for overseas cup plants.

Made in India

Slitting Rewinding Machine

Paper Cup Slitting Rewinding Machine

Name: Yogi Engineering Works
Address: Shop No. G/5, Arpan Bungalow & Shop, Ramol Road, Gatrad, Daskroi, Ahmedabad, Gujarat, 382449, IN
Telephone: +91-8487884122
Price range: ₹₹

Paper Cup Slitting Rewinding Machine from Yogi Engineering Works — A paper cup slitting rewinding machine for PE-coated paper cup stock, slitting jumbo rolls into precise widths ready for cup-forming machines. 500–2500 mm width, jumbo rolls up to 1000 kg, pan-India delivery with lifetime spares support.

Get the best price

Factory-direct pricing, custom-built to your width, speed & material. Share your requirement for a quick quotation.

Made in India
Pan-India delivery in 4–6 weeks
Lifetime spares support

WhatsApp +91-8487884122

Machine Structure
MS Plate Heavy Duty
Working Width
500 - 2500 mm (customisable)
Motor
3 HP - 12 HP AC
Control Panel
AC Digital Frequency Drive
Rewinding Speed
150 MPM (up to 300 MPM optional)
Jumbo Roll Capacity
Up to 1000 kg

About this machine

A paper cup slitting rewinding machine for PE-coated paper cup stock, slitting jumbo rolls into precise widths ready for cup-forming machines. Manufactured by Yogi Engineering Works in Ahmedabad, the Paper Cup Slitting Rewinding Machine is built on an MS plate heavy-duty structure with a precision cutter (knife) slitting assembly, AC digital frequency drive and mechanical brake tension control. It supports 500–2500 mm working widths, jumbo rolls up to 1000 kg, roll diameters up to 1000 mm and rewinding speeds of 150 MPM (up to 300 MPM optional), in drum, center-shaft or surface (double-drum) winding configurations. Processes paper cup stock, PE-coated paper and food-grade coated paper rolls. Each Paper Cup Slitting Rewinding Machine is factory-tested before dispatch, delivered pan-India in 4–6 weeks and backed by on-site commissioning and lifetime spares support.

Full specifications

Machine Structure	MS Plate Heavy Duty
Working Width	500 - 2500 mm (customisable)
Motor	3 HP - 12 HP AC
Control Panel	AC Digital Frequency Drive
Rewinding Speed	150 MPM (up to 300 MPM optional)
Jumbo Roll Capacity	Up to 1000 kg
Roll Diameter	Up to 1000 mm
Winding Type	Drum / Center Shaft / Surface
Power Supply	Three Phase 415 V / 50 Hz
Country of Origin	Made in India

Key features

MS plate heavy-duty machine structure
AC digital frequency drive control panel
Auto start / stop with emergency stop button
Length counting meter & speed-adjustable sensor
Mechanical brake system for jumbo roll tension
Slitting system with cutter (knife) assembly
Hydraulic web (edge) guide system for clean finishing
Chuck-nut-bearing mechanical shaft unwinder / rewinder

Optional add-ons

Pneumatic / air shaft upgrade
Auto tension control system
Edge / web guide system (hydraulic)
High-speed 3-drive / 4-drive configuration

Get the best price on the Paper Cup Slitting Rewinding Machine

Factory-direct pricing — no dealer markup. Reply within 24 hrs.

Also known as / related searches

The Paper Cup Slitting Rewinding Machine is also searched for as:

Paper Cup Slitter Rewinder Machine
Paper Cup Slitting Machine
Paper Cup Slitter Machine
Paper Cup Slitting Rewinder Machine
Paper Cup Slitter Rewinding Machine
Paper Cup Slitting Rewinding Machine Manufacturer
Paper Cup Slitter Rewinder Machine Manufacturer
Paper Cup Slitting Machine Manufacturer
Paper Cup Slitter Machine Manufacturer
Paper Cup Slitting Rewinder Machine Manufacturer
Paper Cup Slitter Rewinding Machine Manufacturer
Paper Cup Slitting Rewinding Machine Manufacturer in India
Paper Cup Slitting Rewinding Machine Manufacturer in Ahmedabad
Paper Cup Stock Slitting Rewinding Machine
Paper Cup Stock Slitter Rewinder Machine
Paper Cup Stock Slitting Machine
Paper Cup Stock Slitter Machine
Paper Cup Stock Slitting Rewinder Machine
Paper Cup Stock Slitter Rewinding Machine
Paper Cup Stock Slitting Rewinding Machine Manufacturer
Paper Cup Stock Slitter Rewinder Machine Manufacturer
Paper Cup Stock Slitting Machine Manufacturer
PE Coated Paper Slitting Rewinding Machine
PE Coated Paper Slitter Rewinder Machine
PE Coated Paper Slitting Machine
PE Coated Paper Slitter Machine
PE Coated Paper Slitting Rewinding Machine Manufacturer
Paper Cup Slitting Rewinding Machine
Paper Cup Slitting Rewinding Machine In India
Paper Cup Slitting Rewinding Machine In Ahmedabad
Paper Cup Slitting Rewinding Machine Price
Paper Cup Slitting Rewinding Machine Supplier
Food Grade Paper Slitting Machine
Food Grade Paper Slitting Rewinding Machine

Frequently asked questions

Common questions about the Paper Cup Slitting Rewinding Machine.

Still have questions? Talk to our team.

Get a free custom quote for the Paper Cup Slitting Rewinding Machine — reply within 24 hrs.

What is a Paper Cup Slitting Rewinding Machine? PE-coated stock slitting explained

A paper cup slitting rewinding machine slits PE-coated paper cup board into the exact widths a cup-forming machine needs. Cup stock is a stiff, food-grade board (commonly 170 to 350 GSM) with a polyethylene coating on one or both sides, and that coating changes everything: the knife must cut cleanly through paper and PE film together without dragging, melting or leaving a ragged edge, because a poor edge causes leaks and seam faults in the finished cup. Width accuracy is critical, since cup blanks are sized to the millimetre.

Sold also as a paper cup slitting machine, paper cup stock slitting machine or PE coated paper slitting machine, this build uses sharp shear knives suited to coated board and firm, even tension so the stiff stock winds flat and square without cracking the coating. Yogi configures it for 500 to 2500 mm width and jumbo reels up to 1000 kg, with surface or center-shaft winding and 150 MPM standard, 300 MPM optional, delivering precise, forming-ready rolls for paper cup plants.

Paper cup stock slitting — applications, industries and why Yogi

With single-use plastic curbs pushing demand for paper cups, India's paper cup makers need cup board slit to precise, repeatable widths. The machine serves disposable cup and container manufacturers, food-grade and PE-coated board converters, and packaging units making coated paper plates and lids, all of which depend on dimensionally accurate rolls to keep their forming machines running without rejects.

Disposable paper cup and container forming stock
PE-coated, food-grade board converting
Coated paper plate, bowl and lid blanks

Yogi Engineering Works, ISO 9001:2015 certified in Ahmedabad, Gujarat, sells factory-direct from its GIDC unit with about 4 to 6 week pan-India delivery, commissioning support and lifetime spares, making it a practical fit for the many MSME paper cup plants setting up across India. View the full slitting rewinding machine range, or compare the self-adhesive Sticker Paper Slitting Rewinding Machine and the heavy-board Kraft Paper Slitting Rewinding Machine for other coated and board grades. For tight width tolerance on stiff cup stock, our note on the importance of a web guiding system in slitting explains how edge guiding keeps cuts square.

Paper Cup Slitting Rewinding Machine Price in India — Affordable & Factory Direct

The price of a Paper Cup Slitting Rewinding Machine in India depends on working width (500–2500 mm), winding type (drum / center-shaft / surface), rewinding speed (standard 150 MPM or high-speed up to 300 MPM), automation level and optional accessories. Entry-level light-duty models start from approximately ₹3–5 lakh; mid-range heavy-duty models range from ₹8–15 lakh; and fully-automatic high-speed configurations with auto tension, web guide and pneumatic shafts start from ₹15–25 lakh.

Yogi Engineering Works offers the most affordable Paper Cup Slitting Rewinding Machine in India at factory-direct prices — no dealer markup, no middleman cost. Call or WhatsApp +91-8487884122 for a free, no-obligation custom price quotation within 24 hours. We dispatch pan-India in 4–6 weeks and also export to UAE, Saudi Arabia, Bangladesh, Sri Lanka, Nepal, Kenya, Nigeria, Malaysia and Southeast Asia.

Customer reviews

What our buyers say

Reviews about Paper Cup Slitting Rewinding Machine

No reviews yet. Be the first to share your experience.