How does the poly film slitting rewinding machine cope with stretchy polythene film?

Polythene (poly) film is soft and elastic, so it stretches and necks down under pull, narrowing the web and throwing off slit widths. Our poly film slitter applies low, finely controlled tension with taper as the roll builds, plus a center-shaft winder, so the film is guided rather than pulled. This keeps slit dimensions accurate and avoids the stretching that ruins poly rolls.

What is neck-down on poly film and how is it controlled?

Neck-down is when stretchy poly film narrows in the unsupported span because tension elongates it. It is controlled by keeping tension low and steady, shortening unsupported web spans with driven idlers, and using taper tension so pull eases as diameter grows. With gentle handling the poly film slitting machine holds true width and delivers flat, wrinkle-free finished rolls.

Why does poly film need gentler tension than BOPP or PET?

Stiff BOPP and high-tensile PET hold their dimensions under firm tension, but soft polythene elongates easily, so the same pull would stretch and distort it. The poly film slitter therefore runs much lower, taper-controlled tension and gentle center-shaft winding. This protects the elastic film, keeps slit widths consistent and prevents the baggy, stretched edges typical of mishandled poly.

What blade type suits poly and polythene film slitting?

Soft poly film usually slits best with razor (score) blades, which part the stretchy web cleanly without dragging or stretching the edge. Shear knives can be used on heavier poly. Because the film moves and clings, we combine sharp razor blades with anti-static control and low tension so each slit edge is clean and the webs stay separated through to the rewind.

What does a poly film slitter rewinder cost and how fast is delivery?

Cost depends on web width, speed, blade type, slit count and tension automation, so we quote to your spec rather than quoting one fixed price; a simple poly slitter is much cheaper than a servo line. As a guide it falls in the usual mid-range industrial-slitter band. Yogi Engineering Works typically delivers within 4 to 6 weeks across India after confirmation.

Can you customise and export the poly film slitting rewinding machine?

Yes. We build the poly film slitting machine, also sought as a PE or polythene film slitter, to your gauge, width up to 2500 mm, jumbo capacity up to 1000 kg, slit count and automation, tuned for gentle low-tension handling. We export from Ahmedabad and back each machine with warranty, installation, training and prompt spares.

Made in India

Slitting Rewinding Machine

Poly Film Slitting Rewinding Machine

Name: Yogi Engineering Works
Address: Shop No. G/5, Arpan Bungalow & Shop, Ramol Road, Gatrad, Daskroi, Ahmedabad, Gujarat, 382449, IN
Telephone: +91-8487884122
Price range: ₹₹

Poly Film Slitting Rewinding Machine from Yogi Engineering Works — A poly film slitting rewinding machine for polythene / poly films, with soft tension control for stretch-prone material. 500–2500 mm width, jumbo rolls up to 1000 kg, pan-India delivery with lifetime spares support.

Get the best price

Factory-direct pricing, custom-built to your width, speed & material. Share your requirement for a quick quotation.

Made in India
Pan-India delivery in 4–6 weeks
Lifetime spares support

WhatsApp +91-8487884122

Machine Structure
MS Plate Heavy Duty
Working Width
500 - 2500 mm (customisable)
Motor
3 HP - 12 HP AC
Control Panel
AC Digital Frequency Drive
Rewinding Speed
150 MPM (up to 300 MPM optional)
Jumbo Roll Capacity
Up to 1000 kg

About this machine

A poly film slitting rewinding machine for polythene / poly films, with soft tension control for stretch-prone material. Manufactured by Yogi Engineering Works in Ahmedabad, the Poly Film Slitting Rewinding Machine is built on an MS plate heavy-duty structure with a precision cutter (knife) slitting assembly, AC digital frequency drive and mechanical brake tension control. It supports 500–2500 mm working widths, jumbo rolls up to 1000 kg, roll diameters up to 1000 mm and rewinding speeds of 150 MPM (up to 300 MPM optional), in drum, center-shaft or surface (double-drum) winding configurations. Processes poly film, PE film and similar soft plastic films. Each Poly Film Slitting Rewinding Machine is factory-tested before dispatch, delivered pan-India in 4–6 weeks and backed by on-site commissioning and lifetime spares support.

Full specifications

Machine Structure	MS Plate Heavy Duty
Working Width	500 - 2500 mm (customisable)
Motor	3 HP - 12 HP AC
Control Panel	AC Digital Frequency Drive
Rewinding Speed	150 MPM (up to 300 MPM optional)
Jumbo Roll Capacity	Up to 1000 kg
Roll Diameter	Up to 1000 mm
Winding Type	Drum / Center Shaft / Surface
Power Supply	Three Phase 415 V / 50 Hz
Country of Origin	Made in India

Key features

MS plate heavy-duty machine structure
AC digital frequency drive control panel
Auto start / stop with emergency stop button
Length counting meter & speed-adjustable sensor
Mechanical brake system for jumbo roll tension
Slitting system with cutter (knife) assembly
Hydraulic web (edge) guide system for clean finishing
Chuck-nut-bearing mechanical shaft unwinder / rewinder

Optional add-ons

Pneumatic / air shaft upgrade
Auto tension control system
Edge / web guide system (hydraulic)
High-speed 3-drive / 4-drive configuration

Get the best price on the Poly Film Slitting Rewinding Machine

Factory-direct pricing — no dealer markup. Reply within 24 hrs.

Also known as / related searches

The Poly Film Slitting Rewinding Machine is also searched for as:

Frequently asked questions

Common questions about the Poly Film Slitting Rewinding Machine.

Still have questions? Talk to our team.

Get a free custom quote for the Poly Film Slitting Rewinding Machine — reply within 24 hrs.

What is a Poly Film Slitting Rewinding Machine? Poly film slitting explained

A poly film slitting rewinding machine is tuned for polythene (PE) films, which are soft, stretchy and easy to deform. Unlike stiff BOPP or high-tensile PET, poly film yields under tension: pull it too hard at the slit point and it necks down, narrows and wraps tight enough to crush the core. So a poly film slitting machine works at deliberately low, closely controlled tension and relies on taper tension to ease off further as the roll diameter grows.

Yogi's polythene film slitting rewinding machine favours gentle nip pressure and smooth, low-drag roller paths so stretch-prone PE feeds flat rather than wavy. Razor cutting suits thin poly film for a clean, dust-free edge, and anti-static control stops the lightweight web from clinging and mis-tracking. Drum and surface winding give soft, well-formed rolls that hold their width. With working widths of roughly 500 to 2500 mm, jumbos up to about 1000 kg and 150 MPM / 300 MPM speed options, this PE film slitting rewinding machine turns wide poly jumbos into accurate, stretch-free finished rolls.

Poly film slitting applications, industries and why Yogi

Poly film slitting feeds liner and bag stock, lamination films, shrink and stretch wrap, agricultural and mulch film, and FMCG flexible packaging. Across India, polythene converters and MSME bag-makers, many in Gujarat's GIDC belts around Ahmedabad, need soft, square rolls that run smoothly on bag-making and pouching lines without stretching out of register or telescoping under their own weight.

This page is part of our slitting rewinding machine range. Because LDPE behaves almost identically, buyers often compare the LD slitting rewinding machine, while plants juggling several film types prefer the all-rounder plastic film slitting rewinding machine. If you run stretch wrap, our stretch film slitting and rewinding guide covers tension setup in detail. Yogi Engineering Works is an ISO 9001:2015 manufacturer in Ahmedabad supplying factory-direct, with indicative 4 to 6 week pan-India delivery and lifetime spares.

Poly Film Slitting Rewinding Machine Price in India — Affordable & Factory Direct

The price of a Poly Film Slitting Rewinding Machine in India depends on working width (500–2500 mm), winding type (drum / center-shaft / surface), rewinding speed (standard 150 MPM or high-speed up to 300 MPM), automation level and optional accessories. Entry-level light-duty models start from approximately ₹3–5 lakh; mid-range heavy-duty models range from ₹8–15 lakh; and fully-automatic high-speed configurations with auto tension, web guide and pneumatic shafts start from ₹15–25 lakh.

Yogi Engineering Works offers the most affordable Poly Film Slitting Rewinding Machine in India at factory-direct prices — no dealer markup, no middleman cost. Call or WhatsApp +91-8487884122 for a free, no-obligation custom price quotation within 24 hours. We dispatch pan-India in 4–6 weeks and also export to UAE, Saudi Arabia, Bangladesh, Sri Lanka, Nepal, Kenya, Nigeria, Malaysia and Southeast Asia.

Customer reviews

What our buyers say

Reviews about Poly Film Slitting Rewinding Machine

No reviews yet. Be the first to share your experience.