Unwinder Rewinder with Slitting Machine

An unwinder rewinder with slitting machine puts three jobs on one frame: it unwinds the jumbo roll, cuts the running web at a knife station, and rewinds the finished rolls under controlled tension - all in a single continuous pass. Converters know it by many names - unwinding rewinding with slitting, slitting cum rewinding, slitter cum rewinder, rewinder with slitter or simply an unwinder rewinder machine - but the value is the same: you stop handling the roll twice. Where a plain rewinder only re-spools and a plain slitter only cuts, this build does both in one operator pass, which is why small and mid-size plants buy it instead of two separate machines.

The line is built around a mechanical-shaft jumbo unwinder with chuck-nut-bearing and a mechanical brake for unwind tension, a knife (cutter) slitting station with adjustable blade spacing, a hydraulic web (edge) guide, and a chuck-nut-bearing rewinder driven by an AC digital frequency drive with auto start/stop, length counting meter, speed-adjustable sensor and emergency stop. Web widths run from 500 mm to 2500 mm, jumbo rolls up to 1000 kg and 1000 mm diameter, at 150 MPM with a 300 MPM high-speed option. Air-shaft, auto tension control and blower trim extraction are available as upgrades.

The same machine is supplied in two working configurations, and the one you order depends on what the web needs. In the slitting configuration, multiple cutters split the jumbo into several narrow lanes and each lane is rewound to a finished roll - this is the slitting cum rewinding machine most converters mean when they enquire. In the trimming configuration - the unwinding rewinding with trimming machine - only two cutters run, set at the web edges, so the ragged or gummed jumbo edge is shaved off and extracted by blower while the roll is rewound at practically full width, square and edge-perfect. Plants that buy imported or mill-direct jumbo rolls usually need trimming; plants converting to customer widths need slitting; many order the machine with both cutter sets so one line covers both.

A third variant adds a doctoring (inspection) pass, letting the operator stop, splice out a defect and re-rewind while still slitting to width - the practical way to reclaim a rejected jumbo instead of scrapping it.

Unwinder rewinder with slitting lines run daily in flexible-packaging and lamination units, paper and board converters, foil and pharma-foil processors, tape and label houses, and the MSME roll-to-roll workshops across Gujarat's GIDC estates and the wider Indian market. They suit any plant where floor space and manpower are tight and a second machine cannot be justified: one operator, one pass, unwind to finished roll. Because tension is controlled independently on the unwind and rewind sides, the same machine handles delicate 12-micron film and heavy kraft board simply by changing blade type and tension settings.

If you only need multi-lane slitting, compare the dedicated slitter rewinder machine and the all-material slitting rewinding machine, or browse the complete slitting rewinding machine range to match the winding type to your roll. Core grip matters on combined lines, so our air shaft versus mechanical shaft comparison is worth reading before you specify, and the India price and cost guide helps set a realistic budget. Yogi Engineering Works manufactures every machine in Ahmedabad as an ISO 9001:2015, factory-direct supplier, with typical 4-6 week pan-India delivery, on-site commissioning and lifetime spares support.

The price of an Unwinder Rewinder with Slitting Machine in India depends on working width (500–2500 mm), winding type (drum / center-shaft / surface), rewinding speed (standard 150 MPM or high-speed up to 300 MPM), automation level and optional accessories. Entry-level light-duty models start from approximately ₹3–5 lakh; mid-range heavy-duty models range from ₹8–15 lakh; and fully-automatic high-speed configurations with auto tension, web guide and pneumatic shafts start from ₹15–25 lakh.

Yogi Engineering Works offers the most affordable Unwinder Rewinder with Slitting Machine in India at factory-direct prices — no dealer markup, no middleman cost. Call or WhatsApp +91-8487884122 for a free, no-obligation custom price quotation within 24 hours. We dispatch pan-India in 4–6 weeks and also export to UAE, Saudi Arabia, Bangladesh, Sri Lanka, Nepal, Kenya, Nigeria, Malaysia and Southeast Asia.